How to Fix Fertilizer Tow Behind Spreader?

There are five best ways to answer you how to fix fertilizer tow behind spreader. Tighten nuts & bolts, repairing the spreader if it doesn’t turn, and sorting out leaving lines are the noteworthy ones.

Apart from that, you’ll get two more ways, including setting menu & cleaning. These are the ultimate guideline for fixing any tow-behind spreader. However, there is a golden role in fixing any spreader errors. That is the regular inspection which is crucial for any spreader. It’ll save your 80% effort & solve most regular issues easily

If you don’t have any previous experience fixing your spreader, you can also do that today after going through this article. 

5 Ways to Fix Fertilizer Tow Behind Spreader

You will have countless problem with your spreader that needs to be solved. These 5 ways will sort out most of your spreader issues and will give you some permanent solutions. So, let’s get through them.

Check & Tightened Nuts & Bolts

Your first job to fix any of your tow-behind spreaders is to check its nuts & bolts. You may find them loose after using your spreader for a while. In that case, some parts of the spreader will move, and you will fail to get the proper spreading experience from them. Particularly, the joint nuts may come off if you forget to tighten them frequently.

Some nuts will get rust, and they need immediate replacement. So, you must replace them soon and insert a new one accordingly. It will increase the overall performance of your spreader, and besides, it will also help to avoid any unwanted incidents.

Fix Spreader If It Won’t Turn

The biggest problem of the tow behind-spreader is turning issues along with its wheels. Mainly, the spreader is connected to both wheels, and the reels will turn or move the middle part accordingly when you drive or move your spreader. For some reason, the spreader won’t turn, although your wheel will proceed smoothly.

In that case, you need to follow the below guidelines to fix such turning issues of your tow-behind spreader.

  • Turn over The Spreader & Check: once you have any turning issues in your spreader, you need to turn it off the ground. Then move the wheels and see if the spreader runs normally. There are shifting issues if it fails to turn or move as your wheels do. The wheel connector or attached steel may get damaged and fail to move your wheels smoothly.
  • Remove the Wheels & Drill on Wheel Connector: Once you inspect the problem, you need to remove both wheels from the spreader. It will show you some damaged areas on the wheel connectors. Maybe it gets rusted or broken. You need to drill on it to insert a screw or nuts that will keep the wheels attached to the connectors.
  • Place your Wheels & Insert Nuts: Remember, you must drill together on both the wheels and the connectors. It will ensure a safe and perfect drill and create an even hole on both sides. Once you attach the wheels to the connectors, you need to attach the wheels and check if the spreader moves freely. It should move along with your wheels.

Fixing Leaving Lines

Sometimes, you may notice that your spreader fails to spread the fertilizer evenly, and you get some stripes on your lawn. It happens because of the misapplication of the fertilizer. It will frequently occur if the spreader edges are not aligned perfectly. So, you must take care of the spreader edges from where the fertilizer will be spread. If they are misaligned, you need to check manually and align them again.

Fix Dirt and Dust Issues

Another frequent problem is dirt & dust issues. Look, your spreader will go through the entire garden or lawn. Therefore, it will have a lot of dirt and dust daily. Sometimes, this dirt will clog the wheels or even the spreader. On that occasion, you won’t get the optimum performance from your spreader. Only regular cleaning and maintenance will help you get rid f such problems,

Fix Spreader Setting Menu

Some modern spreaders will come with a set menu. You can control the spreader fertilization and other factors from it. If you have ever seen any abnormal spreading from it, you should check the settings and reset the menu. You can check the spreading rate and manually check the spreader edges.

Tips to Fix fertilizer Tow-Behind Spreader

Those are the top five ways to fix the problems of your tow-behind spreaders. Apart from that, you may also face some common issues that could be solved by following simple tips.

  1. Regular inspection is the best practice to avoid any significant problems with your spreader. You will understand any abnormal spreading issues or other problems if you regularly inspect your spreader.
  2. As explained before, you must remove the dirt & dust after every use. If you leave your spreader after using it, the existing dirt & dust will go through the wheels and other loose parts of your spreader. As a result, they will create clogs and decrease the spreader performance.
  3. Replace any of the damaged parts with a new one. Let’s see, one of your wheels is damaged and stops moving freely. If so, it needs an immediate replacement with a new one to keep up the excellent work. It might happen with the wheel connectors that I talked about above.
  4. Try to understand the spreader settings menu properly. You must have a manual guideline to operate your spreader. You should go through it and ensure optimum use. It will sort out most of the spreading issues within the shortest possible time.

Closing Words

After knowing these tips and going through the above, you might say, “I know how to fix fertilizer tow-behind spreader.” Repairing your damaged spreader will be fun as getting the optimum spreading service from your Brunei.

Those ways are the best-fitted and mostly used tips to fix any spreader, and you can follow them before replacing any significant parts or re-invest in your spreader.

Sharing Is Caring:

Leave a Comment